What you need
- A MAG 322, 324, 349, 351, 420, 424 or 520 box
- The MAC address from the sticker underneath (starts with 00:1A:79)
- The portal URL from your Kemo SAT activation message
How to install Kemo IPTV on MAG Box
- 1
Send your MAC address
Add the MAC address in the order notes or send it on WhatsApp. We register it to your subscription and send the portal URL.
- 2
Open the system settings
Turn on the box. On the portal loading screen press SETUP/SET on the remote, or from the home screen choose Settings → System settings.
- 3
Go to Servers → Portals
Select Servers, then Portals. You'll see fields for Portal 1 and Portal 2.
- 4
Enter the portal
Portal 1 name: Kemo SAT. Portal 1 URL: paste or type the portal address exactly as sent, including http:// and the ending slash. Leave Portal 2 empty.
- 5
Save and restart
Press OK to save, go back to the main settings and choose Restart portal (or unplug the box for ten seconds). The Kemo interface loads with live TV, the guide and VOD.
Tips for MAG Box
- MAG boxes perform best on Ethernet — many models have weak Wi-Fi dongles.
- Under Settings → Video, set the output to match your TV (1080p-50 in Europe/UK, 1080p-60 in North America).
- Keep the box firmware updated through Settings → Software update.
Troubleshooting Kemo IPTV on MAG Box
'STB is blocked' or 'Your STB is not supported'
The MAC address registered doesn't match the box. Check the sticker again — MAG MAC addresses start with 00:1A:79 — and send us a photo of it.
Stuck on 'Loading portal…'
Check the portal URL for a missing slash at the end or a typing error, then confirm the internet connection under Settings → Network → Wired (Ethernet) status.
Still stuck? Read how to fix Kemo IPTV buffering or contact support with a photo of the screen.